304DQ DDQ муздак дат баспас болоттон жасалган катушка
Кыска Description:
304 DQ DDQ material is widely used as all kinds of stainless steel kitchen wares, DDQ (deep drawing quality) material: refers to the material used for deep drawing (redrawing), which is what we call soft material. The main characteristic of this material is its high elongation (≧53%), hardness Low (≦170%), internal grain grade between 7.0~8.0, excellent deep drawing performance. Many companies that produce thermos and pots generally have higher processing ratios (BLANKING SIZE/product diameter), and their processing ratios are 3.0, 1.96, 2.13, and 1.98, respectively.
Description of 304 DQ DDQ Cold Rolled Stainless Steel Coil, 304 DQ DDQ CRC
- туурасы: 0.2mm - 8.0mm
- туурасы: 600мм - 2000мм, тар азыктары pls тилке азыктарын текшерүү
- Катушканын максималдуу салмагы: 25MT
- Катушканын ID: 508mm, 610mm
- Finish: 2B, 2D
- Other Names of 304 DQ DDQ: SUS304DQ SUS304DDQ S30408DQ 06Cr19Ni10DQ 0Cr18Ni9DQ S30400DQ
- 304DQ DDQ Chemical Components : C: ≤0.08, Si: ≤0.75 Mn :≤2.0 ,Cr :18.0~20.0 ,Ni :8.0~10.5, S :≤0.03 ,P :≤0.045 N≤0.1
- 304DQ DDQ mechanical properties :
- Тартуу күчү: > 515 МПа
- Чыгымдуулугу: >205 МПа
- Узартуу (%): > 53%
- Катуулугу: < HRB92
Differences in the Applications of 304 DQ DDQ Materials and General Materials:
304DQ DDQ material is mainly used for these higher processing ratio of the product, of course, the processing ratio of more than 2.0 products generally have to undergo a few passes to complete the stretch. If the raw material extension is not reachable, the product can easily produce cracks and pull-throughs when processing deep-drawing products, affecting the qualification rate of finished products, and of course increasing the cost of the manufacturers.
General materials: Mainly used for materials other than DDQ applications. This material is characterized by relatively low elongation (≧45%), relatively high hardness (≦180HB), and internal grain size grade of 8.0~9.0. Compared with DDQ material, its deep drawing performance is relatively poor. It is mainly used for products that can be obtained without stretching, like spoons, spoons, forks, electrical appliances, and steel pipes for a type of tableware. However, it has an advantage over DDQ materials in that BQ properties are relatively good, mainly due to its slightly higher hardness.
дүйнө жүзү боюнча дат баспас болоттон жасалган буюмдардын алдынкы берүүчү катары, Кытай дат баспас болот provides customers with high-quality 304 DQ DDQ Cold Rolled Stainless Steel Coils and other stainless steel products such as Ыстык прокатталган дат баспас катушкалар, Жылмаланган дат баспас болоттон жасалган катушкалар, Дат баспас болоттон жасалган зымдар, жана Дат баспас болоттон жасалган тактайлар at a very competitive price. at a very competitive price.
Болат түтүк
Дат баспас болоттон жасалган катушка зым
Дат баспас болоттон жасалган муздак прокатталган катушкалар
Дат баспас болоттон жасалган конденсатордук катуш
Дат баспас болоттон жасалган барак катушкасы
Дат баспас болоттон жасалган Strip Coil
Болот түтүк катушкасы
Кабарыңызды калтырыңыз
Тектеш темалар:
- 202 муздак прокатталган дат баспас болоттон жасалган катушка (0.2мм-3мм)
- 301 муздак прокатталган дат баспас болоттон жасалган катушка (0.2мм-3мм)
- 310с муздак прокатталган дат баспас болоттон жасалган катушкалар (0.2мм-3мм)
- 409 409L Муздак прокатталган дат баспас болоттон жасалган катушкалар (0.2мм-8мм)